|
|
|
|
|
|
|
|
Traverse |
|
|
|
# M5 Single Axis Tilting
Traverse |
|
|
|
* Maximum traverse length is 40 inches |
|
|
* Traverse speed from 2 inches to 50 inches per minute |
|
* Torch weight capacity 40 pounds |
|
* Working height approximately 40 inches from floor |
|
* Portable unit provided with casters and floor locks |
|
* Traversing angle adjustable, horizontal and vertical |
|
* Base dimensions 41” x 41” with 60” traverse |
|
* Equipped with Jog, Spray and Rapid speed adjustments |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# M34 Horizontal / Vertical Traverse |
|
|
|
* Horizontal Stroke:
60” with 3” acceleration & deceleration |
|
|
* Vertical
Stroke: 60” with 2” acceleration
& deceleration |
|
* Horizontal &
Vertical speed: 1-150 SFPM (opt. 200
SFPM) |
|
* Stepping
capabilities of 1/8”, 1/4”, 1/2” on both axes |
|
* Programs: step horizontal, step vertical, step both
or step none |
|
* Jog: up, down,
right, left, with speed adjustments |
|
* Limit switches on slide adjustment |
|
* Air powered counter-balance for torch weight |
|
|
|
|
|
|
|
|
|
|
|
[ Movie ] |
|
|
|
|
|
M2 Spray Booth : Headstock, Turntable |
|
|
and XY Traverse |
* M2BXY Traverse unit for M2 spray booth |
|
|
* Dim. 58.5" W x 72" H x 48" D. Working Inlet 31.75" H x 50" W. |
|
* Horizontal X-Axis, Stroke 48", Speed 1 to 175 SFPM |
|
* Vertical Y-Axis, Stroke 24", Speed 0.5 to 6 SFPM |
|
* Adjustable limit switches for travel distance |
|
* DC Motor drive with counter for each axis |
|
* Stepping ability on both axis. |
|
* X,Y Traverse mounts to front face of booth |
|
|
|
|
|
|
|
|
|
|
|
[ Movie ] |
|
|
|
|
|
# M1 Horizontal / Vertical Traverse |
|
|
|
|
|
* Rolles in front of M2 Spray Booth |
|
* Horizontal X-Axis, Stroke 38", Speed 1 to 150 SFPM,
6" Ramp |
|
* Vertical Y-Axis, Stroke 16", Speed 0.5 to 6 SFPM,
1" Ramp |
|
* Stepping
capabilities of 1/8”, 1/4”, 1/2” on both axes |
|
* Caster and Floor Locks |
|
* Computer and Servo Driven |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|